نحن في هيليوبوليس ملتزمون بتزويد عملائنا بمنتجات وخدمات عالية الجودة وبأسعار معقولة. نعتقد أنه من مسؤوليتنا تجاوز توقعات عملائنا من خلال إبقائهم على اطلاع دائم بمنتجاتنا وخدماتنا. نرحب أيضًا بتعليقات عملائنا الكرام من أجل تلبية جميع احتياجاتهم.
في هيليوبوليس ، نحن ملتزمون بحماية البيئة والمساحات الخضراء. نعتقد أن الحفاظ على البيئة واستمرار الحياة الخضراء من أهم القضايا التي تهمنا. هدفنا هو تقليل الأثر السلبي والحفاظ عليه في كل سلعة أو خدمة نقدمها.
ونحن نفهم أن وقتك ثمين. لهذا السبب نستخدم أحدث الأساليب الإلكترونية والتطبيقات الحديثة لخدمة عملائنا بسرعة وكفاءة وفعالية. هذا يسهل خدمة العملاء والوصول إلى منتجاتنا إلكترونيًا من خلال تطبيق الهواتف الذكية دون الحاجة إلى الأساليب التقليدية.
نحن ملتزمون بتزويد عملائنا بمنتجات عالية الجودة. ينبع هذا الالتزام من التزامنا الصارم بمعايير إدارة الجودة الدولية. وفقًا لهذه المعايير ، تخضع الجودة لعملية تدقيق وفحص صارمة. تعد مراقبة الجودة جزءًا لا يتجزأ من نظام إدارة الجودة في هيليوبوليس .
كربونات الكالسيوم ، كربونات الكالسيوم المطلية ، بودرة التلك ، جص الجبس ، الجير (الجير المطفأ والجير السريع) ، الكاولين ، زهرة السيليكا ، رمل السيليكا ، الجص الزراعي ، الكوارتز ، الدولوميت ، الفلسبار ، البنتونيت ، الفوسفات ، أكسيد المغنيسيوم ، كربونات المغنيسيوم ، أكسيد الزنك ، إضافات كيميائية ، مركب حشو الوصلات لألواح الجبس ، تشطيب صلب (معجون حوائط جبس).
غير مطلي
مطلي
محبب
بودرة التلك
لصقات الجبس
جير رطب
جير سريع
كاولين
رمال السيلكا
الدولوميت
سليكات الألمونيوم
أكسيد المغنيسيوم
كوارتز
جص زراعي
للمذيد من المنتجات او المعلومات تواصل معنا
شركة هليوبوليس للتعدين لتصنيع ومعالجة المعدات المتكاملة ومواد البناء بدأت في الإنتاج في عام 2009 برؤية للنجاح المستمر في مجال المعادن الصناعية من خلال إنتاج وتصنيع مجموعة واسعة من المنتجات الموثوقة التي تخدم صناعات متنوعة مثل الورق والبلاستيك والدهانات ، البناء والطلاء ومستحضرات التجميل والمواد الغذائية ومواد البناء والتطبيقات الأخرى.
أنشأت شركتنا أول مصنع لها في عام 2009 لإنتاج ، طحن ومعالجة الحجر الجيري وبودرة التلك من أجل مواكبة أسواق السوق والحفاظ على السلام مع التطوير في جميع العلوم والتكنولوجيا باستخدام عدد من أفضل الخبراء والهندسيين وأفضل خطوط الإنتاج لها إنتاج وطحن ومعالجة الحجر الجيري ومسحوق التلك ومن خلال علامتنا التجارية للتعدين في مصر الجديدة (HM) ، والحمد لله ، ثم نجاح الخط الأول ، وقد أثبتت منتجاتنا جودتها واستقرارها في السوق المحلي والعالمي في عام 2012 ، تم وضع حجر الأساس لخطي إنتاج أحدهما لإنتاج ومعالجة الجبس ومشتقاته ، والخط الثاني لإنتاج وطحن الجير المطفأ والجير السريع ، وبفضل الله أثبتت منتجاتنا جودتها و الاستقرار بين عملائنا على المستوى الداخلي والخارجي.
بفضل الله والعمل الدؤوب لفريقنا حققنا ما يلي
- مراقبة الجودة المتسقة لمنتجاتنا ، التواصل المستمر مع العملاء وتقديم الخدمات الفنية والاستشارات لمنتجاتنا.
تلتزم شركة هيليوبوليس بحماية خصوصيتك واحترامها ، وسنستخدم معلوماتك الشخصية فقط لتوفير المنتجات والخدمات التي طلبتها منا. نود التواصل معك من وقت لآخر بخصوص منتجاتنا وخدماتنا ، بالإضافة إلى المحتويات الأخرى التي قد تهمك
:البريد الالكتروني
info@heliopolismining.com
:رقم الهاتف
01064364112
-
01024000626
-
0554351154
:رقم دولي
(+2) 01064364112
-
(+2) 01024000626
-
(+2) 0554351154
:عنوان الادارة
مكتب رقم 7, مبني رقم 6, مول البترا, العاشر من رمضان, الشرقيه, مصر
:عنوان المصنع
المنطقة الصناعية 3 - أ5, العاشر من رمضان, الشرقيه, مصر
:الكود البريدي
44629
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC1 is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized by its high whiteness.
HC1 is used in paper, Powder coating (glossy finish), water based and solvent based paints, protective paints, printing inks, adhesives and sealants.
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 20 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.6 ±0.05 g/cm³ |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC 1 |
|---|---|
| Particles < 2 μm | 34 ± 2 % |
| Main Particle Size (D50) | 3.2 ±0.2 μm |
| Top Cut (D98) | 12 ± 1.0 μm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC1 is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized by its high whiteness.
HC1 is used in paper, Powder coating (glossy finish), water based and solvent based paints, protective paints, printing inks, adhesives and sealants.
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 18.5 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.65 ±0.05 g/cm³ |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC 1 |
|---|---|
| Particles < 2 μm | 30 ± 2 % |
| Main Particle Size (D50) | 3.9 ±0.2 μm |
| Top Cut (D98) | 15 ± 1.0 μm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC 2 is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized by its high whiteness.
HC 2 is used in paper, Powder coating (glossy finish), water based and solvent based paints, protective paints, printing inks, adhesives and sealants.
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 17 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.8 ±0.05 g/cm³ |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC 2 |
|---|---|
| Particles < 2 μm | 25 ± 2 % |
| Main Particle Size (D50) | 5.5 ±0.2 μm |
| Top Cut (D98) | 25 ± 1.0 μm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC 2 is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized by its high whiteness.
HC 2 is used in paper, Powder coating (glossy finish), water based and solvent based paints, protective paints, printing inks, adhesives and sealants.
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 19 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.83 ±0.05 g/cm³ |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC 2 |
|---|---|
| Particles < 2 μm | 30 ± 2 % |
| Main Particle Size (D50) | 4.5 ±0.2 μm |
| Top Cut (D98) | 20 ± 1.0 μm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC 3 is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized by its high whiteness.
HC 3 is used in paper, Powder coating (glossy finish), water based and solvent based paints, protective paints, printing inks, adhesives and sealants.
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 16.5 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.82 ±0.05 g/cm³ |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC 3 |
|---|---|
| Particles < 2 μm | 21 ± 2 % |
| Main Particle Size (D50) | 6.4 ±0.2 μm |
| Top Cut (D98) | 32 ± 1.0 μm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC 4 is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized by its high whiteness.
HC 4 is used in paper, Powder coating (glossy finish), water based and solvent based paints, protective paints, printing inks, adhesives and sealants.
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 15 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.87 ±0.05 g/cm³ |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC 4 |
|---|---|
| Particles < 2 μm | 18 ± 2 % |
| Main Particle Size (D50) | 6.8 ±0.2 μm |
| Top Cut (D98) | 40 ± 1.0 μm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC 5 is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized by its high whiteness.
HC 5 is used in paper, Powder coating (glossy finish), water based and solvent based paints, protective paints, printing inks, adhesives and sealants.
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 14.5 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.9 ±0.05 g/cm³ |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC 5 |
|---|---|
| Particles < 2 μm | 10 ± 2 % |
| Main Particle Size (D50) | 10 ±0.2 μm |
| Top Cut (D98) | 56 ± 1.0 μm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC 6 is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized by its high whiteness.
HC 6 is used in paper, Powder coating (glossy finish), water based and solvent based paints, protective paints, printing inks, adhesives and sealants.
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 14 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.95 ±0.05 g/cm³ |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC 6 |
|---|---|
| Particles < 2 μm | 8 ± 2 % |
| Main Particle Size (D50) | 8 ±0.2 μm |
| Top Cut (D98) | 60 ± 1.0 μm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC SF is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized by its high whiteness.
HC SF is used in paper, Powder coating (glossy finish), water based and solvent based paints, protective paints, printing inks, adhesives and sealants.
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 19.5 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.57±0.05 g/cm³ |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC SF |
|---|---|
| Particles < 2 μm | 40 ± 2 % |
| Main Particle Size (D50) | 2.5 ±0.2 μm |
| Top Cut (D98) | 10 ± 1.0 μm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC SF is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized by its high whiteness.
HC SF is used in paper, Powder coating (glossy finish), water based and solvent based paints, protective paints, printing inks, adhesives and sealants.
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 20.5 ±1 |
| Bulk Density (ISO 787/11) | 0.55 ±0.05 |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC SF |
|---|---|
| Particles < 2 μm | 50 ± 2 % |
| Main Particle Size (D50) | 2 ±0.2µm |
| Top Cut (D98) | 8 ± 1.00 µm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC SF1 is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized by its high whiteness.
HC SF1 is used in paper, Powder coating (glossy finish), water based and solvent based paints, protective paints, printing inks, adhesives and sealants.
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 21.5 ±1 |
| Bulk Density (ISO 787/11) | 0.5 ±0.05 |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC SF1 |
|---|---|
| Particles < 2 μm | 60 ± 2 % |
| Main Particle Size (D50) | 1.6 ±0.2µm |
| Top Cut (D98) | 6 ± 1.00 µm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC SF2 is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized by its high whiteness.
HC SF2 is used in paper, Powder coating (glossy finish), water based and solvent based paints, protective paints, printing inks, adhesives and sealants.
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 22.5 ±1 |
| Bulk Density (ISO 787/11) | 0.45 ±0.05 |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC SF2 |
|---|---|
| Particles < 2 μm | 70 ± 2 % |
| Main Particle Size (D50) | 1.4 ±0.2µm |
| Top Cut (D98) | 5 ± 1.00 µm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
SF3 is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized by its high whiteness.
SF3 is used in paper, Powder coating (glossy finish), water based and solvent based paints, protective paints, printing inks, adhesives and sealants.
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 24.5 ±1 |
| Bulk Density (ISO 787/11) | 0.35 ±0.05 |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC SF3 |
|---|---|
| Particles < 2 μm | 85 ± 2 % |
| Main Particle Size (D50) | 1 ±0.2µm |
| Top Cut (D98) | 3.5 ± 1.00 µm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
SF3 is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized by its high whiteness.
SF3 is used in paper, Powder coating (glossy finish), water based and solvent based paints, protective paints, printing inks, adhesives and sealants.
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 24.8 ±1 |
| Bulk Density (ISO 787/11) | 0.35 ±0.05 |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC SF4 |
|---|---|
| Particles < 2 μm | 95 ± 2 % |
| Main Particle Size (D50) | 0.7 ±0.2µm |
| Top Cut (D98) | 2 ± 1.00 µm |
المذيد من التفاصيل ؟
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC SFT is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized By its high whiteness& treated with high quality stearic acid
HC SFT is used in several plastic applications such as Rigid PVC (profiles, calendared sheets, pipes), Poly‐olefins (compound/colored master batch ‐ moulds – Plasticized PVC – profiles – artificial leather – cables)
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 19 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.83 ±0.05 g/cm³ |
| STEARIC ACID % | 1.2 ±0.1 % |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC SFT |
|---|---|
| Particles < 2 μm | 50 ± 2% |
| Main Particle Size (D50) | 2.0 ±0.2 µm |
| Top Cut (D98) | 8 ± 1.00 µm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC SF 10T is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized By its high whiteness& treated with high quality stearic acid
HC SF 10T is used in several plastic applications such as Rigid PVC (profiles, calendared sheets, pipes), Poly‐olefins (compound/colored master batch ‐ moulds – Plasticized PVC – profiles – artificial leather – cables)
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 18 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.87 ±0.05 g/cm³ |
| STEARIC ACID % | 1.1 ±0.1 % |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC SF 10T |
|---|---|
| Particles < 2 μm | 40 ± 2% |
| Main Particle Size (D50) | 2.4 ±0.2 µm |
| Top Cut (D98) | 10 ± 1.00 µm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC 1T is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized By its high whiteness& treated with high quality stearic acid
HC 1T is used in several plastic applications such as Rigid PVC (profiles, calendared sheets, pipes), Poly‐olefins (compound/colored master batch ‐ moulds – Plasticized PVC – profiles – artificial leather – cables)
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 17 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.92 ±0.05 g/cm³ |
| STEARIC ACID % | 0.95 ±0.1 % |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC 1 T |
|---|---|
| Main Particle Size (D50) | 3.4 ±0.2 µm |
| Main Particle Size (D50) | 2.4 ±0.2 µm |
| Top Cut (D98) | 12 ± 1.0 µm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC 1T is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized By its high whiteness& treated with high quality stearic acid
HC 1T is used in several plastic applications such as Rigid PVC (profiles, calendared sheets, pipes), Poly‐olefins (compound/colored master batch ‐ moulds – Plasticized PVC – profiles – artificial leather – cables)
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 17 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.92 ±0.05 g/cm³ |
| STEARIC ACID % | 0.95 ±0.1 % |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC 1 T |
|---|---|
| Main Particle Size (D50) | 30 ± 2 % |
| Main Particle Size (D50) | 3.7 ±0.2 µm |
| Top Cut (D98) | 15 ± 1.0 µm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC 2T is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized By its high whiteness& treated with high quality stearic acid
HC 2T is used in several plastic applications such as Rigid PVC (profiles, calendared sheets, pipes), Poly‐olefins (compound/colored master batch ‐ moulds – Plasticized PVC – profiles – artificial leather – cables)
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 16 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.92 ±0.05 g/cm³ |
| STEARIC ACID % | 0.9 ±0.1 % |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC 2 T |
|---|---|
| Main Particle Size (D50) | 28 ± 2 % |
| Main Particle Size (D50) | 4.5 ±0.2 µm |
| Top Cut (D98) | 20 ± 1.0 µm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC SF 1T is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized By its high whiteness& treated with high quality stearic acid
HC SF 1T is used in several plastic applications such as Rigid PVC (profiles, calendared sheets, pipes), Poly‐olefins (compound/colored master batch ‐ moulds – Plasticized PVC – profiles – artificial leather – cables)
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 21 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.75 ±0.05 g/cm³ |
| STEARIC ACID % | 1.4 ±0.1 % |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC SF 1T |
|---|---|
| Main Particle Size (D50) | 60 ± 2 % |
| Main Particle Size (D50) | 1.6 ±0.2µm |
| Top Cut (D98) | 6 ± 1.00 µm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC SF2T is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized By its high whiteness& treated with high quality stearic acid
HC SF2T is used in several plastic applications such as Rigid PVC (profiles, calendared sheets, pipes), Poly‐olefins (compound/colored master batch ‐ moulds – Plasticized PVC – profiles – artificial leather – cables)
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 21 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.75 ±0.05 g/cm³ |
| STEARIC ACID % | 1.6 ±0.1 % |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC SF 2T |
|---|---|
| Main Particle Size (D50) | 70 ± 2 % |
| Main Particle Size (D50) | 1.4 ±0.2µm |
| Top Cut (D98) | 5 ± 1.00 µm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
HC SF3T is a fine particle size, high brightness calcium carbonated derived from pure limestone. It is characterized By its high whiteness& treated with high quality stearic acid
HC SF3T is used in several plastic applications such as Rigid PVC (profiles, calendared sheets, pipes), Poly‐olefins (compound/colored master batch ‐ moulds – Plasticized PVC – profiles – artificial leather – cables)
CHEMICAL COMPOSITION
| CaCO3 | 99 % Min. |
|---|---|
| MgO | 0.05 % |
| Fe2O3 | 0.01 % |
| AL2O3 | 0.01 % |
| SiO2 | 0.02 % |
| CaO | 56.06% |
| L.O.I | 43.89 % |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 96.5 % Min. |
|---|---|
| Whiteness (DIN 6174) | 98.5 % Min. |
| Refractive index | 1.59 |
| Moisture (wt. %) | 0.3 Max. |
| Hardness (Mohs) | 3.00 |
| Density of CaCO3 | 2.730 g/cm3 |
| pH (ISO 787/9) | 9 Max. |
| Oil absorption (ISO 787/5) | 23 ±1 g/100g |
| Bulk Density (ISO 787/11) | 0.65 ±0.05 g/cm³ |
| STEARIC ACID % | 1.85 ±0.1 % |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HC SF 3T |
|---|---|
| Main Particle Size (D50) | 85± 2 % |
| Main Particle Size (D50) | 1 ±0.2µm |
| Top Cut (D98) | 3.5 ± 1.00 µm |
Description & Applications
Calcium carbonate: - Not for medicinal use.
Highly pure and bright Calcium Carbonate product produced from our limestone quarries. HC Stone is successfully used in the manufacturing process of Feed additives, Glass, Milling Industries, Ceramic and Oil Field Drilling,paints , plastics , ….. etc.
Chemical analysis:
| Chemical compound | Percentage% |
|---|---|
| CaCO3 | 99.3 |
| CaO | 55.89 |
| Fe2O3 | 0.01 |
| Al2o3 | 0.06 |
| MgO | 0.05 |
| Sio2 | 0.17 |
| L.O.I | 43.6 |
PHYSICALPROPERTIES
| Brightness (RY) (DIN 6174) | 97.5 % Min. |
|---|---|
| Refractive index | 1.5 |
| Yellowness index | 2.28 % |
| Bulk density | 1.2 g/cm3 |
| PH (ISO 787/9) | 9 Max. |
| Bulk Density (ISO 787/11) | 0.8 ±0.05 g/cm³ |
| Density of CaCO3 | 2.7 g/cm3 |
| Moisture (wt. %) | 0.2 Max. |
| Hardness (Mohs) | 3.00 |
| Particle size | 0 : 10 cm |
Application:
Paints and coatings: Dispersion paints, Powder coatings, Road marking, Primers, Silicone resin paint
Plastics and adhesives: PE, PVC-Undersealing, Adhesives, Sealing compounds. Others: Toothpaste
General application: Feed additives, Glass, Milling Industries, Ceramic and Oil Field Drilling. etc.
المذيد من التفاصيل ؟
Description
Our Talc variety is nearly pure talc. Asbestiform Minerals including Tremolite and so Quartz are not detected. Minor Amount of Chlorite and traces of Carbonate are detected
RECOMMENDED APPLICATIONS
Paints, Ceramics, Chewing gum, Coating, Cosmetics, Pharmaceutical, food industries, Fertilizers, Cables, Paper, Pharmaceuticals, Plastics, Sweets, Body powder
Chemical Composition and Physical Properties
| Sio2 | 60.50 % |
|---|---|
| Mgo | < 31.57% |
| Al2o3 | 0.50 % |
| Fe2o3 | 0.18 % |
| Cao | 0.11 % |
| Na2o | 0.01 % |
| Tio2 | 0.01 % |
| P2o5 | 0.02 % |
| L.O.I. | 4.24 % |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HT 1 |
|---|---|
| Particles < 2 μm | 32 ± 2% |
| Main Particle Size (D50) | 4.3 ±0.2 µm |
| Top Cut (D98) | 15 ± 1.00 µm |
Description
Our Talc variety is nearly pure talc. Asbestiform Minerals including Tremolite and so Quartz are not detected. Minor Amount of Chlorite and traces of Carbonate are detected
RECOMMENDED APPLICATIONS
Paints, Ceramics, Chewing gum, Coating, Cosmetics, Pharmaceutical, food industries, Fertilizers, Cables, Paper, Pharmaceuticals, Plastics, Sweets, Body powder
Chemical Composition
| Sio2 | 60.50 % |
|---|---|
| Mgo | < 31.57% |
| Al2o3 | 0.50 % |
| Fe2o3 | 0.18 % |
| Cao | 0.11 % |
| Na2o | 0.01 % |
| K2o | 0.01 % |
| Tio2 | 0.01 % |
| P2o5 | 0.02 % |
| L.O.I. | 4.24 % |
Physical Properties
| Brightness (RY) (DIN 6174) | 90 % Min. |
|---|---|
| Whiteness (DIN 6174) | 91 % Min. |
| Refractive index | 1.79 |
| -2 Micron | 85 % Min |
| Moisture (wt. %) | 0.4 Max. |
| Hardness (Mohs) | 1.00 |
| Bulk density | 2.7 g/cm3 |
| pH (ISO 787/9) | 8.5 |
| Oil absorption (ISO 787/5) | 49 ±1 g/100g |
| Surface area (m2/g) | 1.43 (m2/g) |
| Acid solubility (wt % as CaO) | < 0.80 gm/L (20˚C) |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HT 2 |
|---|---|
| Particles < 2 μm | 28 ± 2% |
| Main Particle Size (D50) | 4 ±0.2 µm |
| Top Cut (D98) | 20 ± 1.00 µm |
Description
Our Talc variety is nearly pure talc. Asbestiform Minerals including Tremolite and so Quartz are not detected. Minor Amount of Chlorite and traces of Carbonate are detected
RECOMMENDED APPLICATIONS
Paints, Ceramics, Chewing gum, Coating, Cosmetics, Pharmaceutical, food industries, Fertilizers, Cables, Paper, Pharmaceuticals, Plastics, Sweets, Body powder
Chemical Composition
| Sio2 | 60.50 % |
|---|---|
| Mgo | < 31.57% |
| Al2o3 | 0.50 % |
| Fe2o3 | 0.18 % |
| Cao | 0.11 % |
| Na2o | 0.01 % |
| K2o | 0.01 % |
| Tio2 | 0.01 % |
| P2o5 | 0.02 % |
| L.O.I. | 4.24 % |
Physical Properties
| Brightness (RY) (DIN 6174) | 90 % Min. |
|---|---|
| Whiteness (DIN 6174) | 91 % Min. |
| Refractive index | 1.79 |
| Moisture (wt. %) | 0.4 Max. |
| Hardness (Mohs) | 1.00 |
| Bulk density | 2.7 g/cm3 |
| pH (ISO 787/9) | 8.5 |
| Oil absorption (ISO 787/5) | 47 ±1 g/100g |
| Surface area (m2/g) | 1.44 (m2/g) |
| Acid solubility (wt % as CaO) | < 0.78 gm/L (20˚C) |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HT 3 |
|---|---|
| Particles < 2 μm | 25 ± 2% |
| Main Particle Size (D50) | 5 ±0.2 µm |
| Top Cut (D98) | 32 ± 1.00 µm |
Description
Our Talc variety is nearly pure talc. Asbestiform Minerals including Tremolite and so Quartz are not detected. Minor Amount of Chlorite and traces of Carbonate are detected
RECOMMENDED APPLICATIONS
Paints, Ceramics, Chewing gum, Coating, Cosmetics, Fertilizers, Cables, Paper, Pharmaceuticals, Plastics, Sweets, Body powder
Chemical Composition
| Sio2 | 60.50 % |
|---|---|
| Mgo | < 31.57% |
| Al2o3 | 0.50 % |
| Fe2o3 | 0.18 % |
| Cao | 0.11 % |
| Na2o | 0.01 % |
| K2o | 0.01 % |
| Tio2 | 0.01 % |
| P2o5 | 0.02 % |
| L.O.I. | 4.24 % |
Physical Properties
| Brightness (RY) (DIN 6174) | 90 % Min. |
|---|---|
| Whiteness (DIN 6174) | 91 % Min. |
| Refractive index | 1.79 |
| Moisture (wt. %) | 0.4 Max. |
| Hardness (Mohs) | 1.00 |
| Bulk density | 2.7 g/cm3 |
| pH (ISO 787/9) | 8.5 |
| Oil absorption (ISO 787/5) | 47 ±1 g/100g |
| Surface area (m2/g) | 1.44 (m2/g) |
| Acid solubility (wt % as CaO) | < 0.80 gm/L (20˚C) |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HT 4 |
|---|---|
| Particles < 2 μm | 20 ± 2% |
| Main Particle Size (D50) | 7.5 ±0.2 µm |
| Top Cut (D98) | 40 ± 1.00 µm |
المذيد من التفاصيل ؟
The technical specifications of Heliopolis gypsum alpha Medical, Excellent for fixing broken elements, good balance between mechanical properties and smoothness , Heliopolis alpha plaster working in medical purposes and dental
Chemical Specifications
| Constituents | Typical PCT |
|---|---|
| Crystal water | 5 : 7 |
| Hemi-hydrate “ Caso4.½ H20” | 94.00 min. |
| Insoluble Residue | 1.00 max. |
| Fe2O3 | 0.07 max. |
| Cl | 0.015 max. |
| CaO | 37 : 38 |
| So3 | 52 : 54 |
| Moisture | 0.00 |
Physical Properties
| Degree of whiteness | 96 min |
|---|---|
| Water / plaster ratio | 25 -100 % |
| Initial setting time | 15 : 20 minutes |
| Final setting time | 30 – 35 minutes |
| Fluidity | 150 – 240 mm |
| Water absorption | > 8 % |
| Bending strength | >99 kg/cm2 |
| Compressive strength | >325 kg/cm2 |
| Fineness, Retained On sieve ( 325 mesh) | zero |
Packing:
in 25 30 & Kg. Paper or P.P. bags as the standard product, and/or according to the customer requiremen
Diamond White powder composition ready to be mixed with water to form high performance white slurry used for pasting and soldering separators of the gypsum boards .
Applications
Paste gypsum board separators and cracks for smoothing the surface over the all applications . To obtain a several decorative texture over all building surfaces instead of paints . Leveling and lining the surface of plaster as it can reach 5 mm thick.
Technical Specifications:
| Density | 1.55 kg/L |
|---|---|
| Coverage | 3200 M2/ton/0.5mm thickness |
Mechanical Properties
| Compressive strength | 2.5 N/MM2 |
|---|---|
| Flexural strength | 1.5 N/MM2 |
| Surface hardness | 1.2 N/MM2 |
| PH | About 7 |
| Setting time | 60 Minutes or more as request |
| Mixture life ( 25 °c ) | 45 Minutes |
Packing:
25 ±2 kg
STORAGE & SHELF LIFE:
Store in a dry place. JOINT FILLER Gypsum will remain usable 12 months from date of manufacture
(Gypsum plaster & Gypsum binder for building)
Description:
Heliopolis gypsum “is a high quality gypsum extracted from Sinai rocks- with 98% whiteness used for cornices and decorative forms moulding, Pre-cast cornices, Gypsum forms, Pre-cast cornices , Optimum for big size cornices and forms moulding which need medium setting times.
Chemical Specifications:
| Constituents | Typical PCT |
|---|---|
| Crystal water | 5 : 7 |
| Hemi-hydrate “ Caso4.½ H20” | 94.00 min. |
| Insoluble Residue | 1 .00 max. |
| Fe2O3 | 0.07 max. |
| Cl | 0.015 max. |
| CaO | 37 : 38 |
| So3 | 52 : 54 |
| Moisture | 0.00 |
Physical Properties of the product:
| Degree of whiteness | 96 % |
|---|---|
| Water / plaster ratio | 100 -125 % |
| Initial setting time | 7: 13 minutes |
| Final setting time | 24 – 35 minutes |
| Fluidity | 250 – 320 mm |
| Water absorption | >32 % |
| Bending strength | >35 kg/cm2 |
| Compressive strength | >90 kg/cm2 |
| Fineness, Retained On sieve ( 100 mesh) |
APPLICATIONS:
| 1-construction and finishing processes | 2-decorative products |
| 3-production of compound fertilizers and paints | 4-production of gypsum panels |
| 5-gypsum spray and blocks | 6-cement alternative |
QUALITIES:
| 1-bright white | 2-fire resistant |
| 3-superior softness | 4-high level of endurance |
| 5-sound and heat barrier | 6-health-safe material |
Packing:
in 40 Kg. plastic bags as the standard product, and/or according to the customer requirements
PRODUCT DESCRIPTION:
Hard finish gypsum putty is a ready-to-use, multi-purpose joint filler, made of high quality binders and selected non-toxic fillers. It is suitable for a wide range of interior and weather protected exterior areas for non-structural filling, achieve smooth and seamless walls and ceilings. The ready-to-use gypsum putty is easy to apply making it ideal for simple home renovations and do-it-yourself fixes. It can be used over concrete, plywood, wood, gypsum or fiber cement boards embedding fasteners, reinforcing tape & plastic or metal trim filling knots, dents, splits, nail holes & correcting other minor surface imperfections prior to finishing . Hard finish gypsum putty is Eco-friendly product, which have low Volatile Organic Compound (VOC) levels bearing little or no adverse effects to the environment. Its components contain no harmful chemical additives, creating a safe living environment for you & your family.
ADVANTAGES:
SURFACE PREPARATION:
The surface must be structurally stable, level and dry. Make sure the surface is clean and free from contaminants such as dirt, dust, loose material, oils and chemicals .
APPLICATION GUIDE
COVERAGE
To fill joints between gypsum boards , plywood or fiber cement boards , 1 kg of EXTRA 120 Gypsum putty covers approximately 3 : 3.5 linear meters of tapered joints at 15:18 cm wide To smoothen plywood surfaces , 1 kg of Hard finish gypsum putty covers approximately 4 : 4.25 sqm per coat .
PACKAGING
12:12.5 kg
STORAGE & SHELF LIFE
Store in a dry place. Hard finish Gypsum Putty will remain usable 12 months from date of manufacture.
Heliopolis Alpha plaster Extra Super Nano
The technical specifications of Heliopolis gypsum molding plaster work in the field of sanitary works molds, tableware, porcelain, antiques , statues , Cornice and decoration industry and Casting of dental molds
Chemical Specifications
| Constituents | Typical PCT |
|---|---|
| Crystal water | 5 : 7 |
| Hemi-hydrate “ Caso4.½ H20” | 94.00 min. |
| Insoluble Residue | 1 .00 max. |
| Fe2O3 | 0.07 max. |
| Cl | 0.015 max. |
| CaO | 37 : 38 |
| So3 | 52 : 54 |
| Moisture | 0.00 |
Physical Properties of the product:
| Degree of whiteness | 96 min |
|---|---|
| Water / plaster ratio | 25 -100 % |
| Initial setting time | 15 : 20 minutes |
| Final setting time | 30 – 35 minutes |
| Fluidity | 150 – 240 mm |
| Water absorption | > 8 % |
| Bending strength | >99 kg/cm2 |
| Compressive strength | >325 kg/cm2 |
| Fineness, Retained On sieve ( 100 mesh) | zero |
PACKAGING
in 25 30 & Kg. Paper or P.P. bags as the standard product, and/or according to the customer requiremen
Calcium hydroxide, Ca(OH)2, white powder. It is prepared by reacting calcium oxide (lime) with water; a process called slaking, and is also known as hydrated lime.
Chemical analysis:
| Chemical compound | Percentage |
|---|---|
| Ca(OH)2 | 90- 80 % |
| MgO | 1 % max |
| sio2 | 1 % max |
| Al2O3 | 0.05 % |
| Fe2O3 | 0.04 % |
| CO2 residual | 4 % max |
| Heavy metals | traces |
Physical Properties of the product
| Particle size | 50-80 Micron |
|---|---|
| Color | Pure white |
| Density | 0.5-0.6 |
| Reactivity (neutralization of a pure acid per 100g of lime ) | 90g of hydrochloric acid 160 g of nitric acid |
Major Applications Areas
Water Treatment Plant - Effluent Treatment Plant - Paint industry – Petroleum refining industry - Food industry Leather industry - Paper industry - Metallurgical industry -Copper, Aluminum, Steel, Iron - Glass industry Pharmaceutical industry - Di Calcium Phosphate manufacturing - Rubber industry - Road making and construction industry
Packing
poly propylene bags 25 kg or jumbo bag and/or according to the customer requirements
المذيد من التفاصيل ؟
The most important qualities of the neighborhood lime power of his attraction to the Union of water while giving high temperature and produces from it hydrated lime .otanaj Hzhh process to a temperature ranging between (1000 m - 1100) it is recognized by the industry for centuries), where loses carbon dioxide and44% of its weight, leaving behind calcium oxide (quicklime), It is a white, caustic, alkaline, crystalline solid at room temperature
Chemical analysis:
| Chemical compound | Percentage |
|---|---|
| CaO | 90 % ±5 % |
| MgO | 1% |
| sio2 | 0.5 % |
| Al2O3 | 0.2 % |
| Fe2O3 | 0.15 % |
| Co2 | 2 % |
Physical Properties of the product
| Density | 3.34 |
|---|---|
| Molar mass | 56.0774 g |
| Solubility | Soluble in water &glycerol |
| Color | Pure white |
| Melting point | 2572 oC |
| Boiling point | 2850 oC |
| Particle size | 50 -70 Micron or blocks (as request) |
Physical Properties of the product
1-Steel industry
2-Water treatment
3-Slurry treatment
4-Stabilization of heavy metals
5-Soil amendment
6-Other applications: Sugar, food and paper industries.
Packing
poly propylene bags or jumbo bag and/or according to the customer requirements
المذيد من التفاصيل ؟
Description & Applications
Kaolin of the required metals in industrial applications due to its high ability to absorb water and its ability to transfer heat and electricity is weak, Kaolin is an inert metal that is not chemically effective. In addition, it has a strength in covering and concealment when used as a colored material in dyeing and coating works or as a filler. Kaolin used in several plastic applications such as Refractories industry , Chinese and porcelain industry, Rubber industries, Battery industry, ceramics, porcelain, sanitary ware ,Paper industry, Cosmetic , Medications , Agriculture and Manufacture of pesticides .
| kaolin type | illitic | Exceel |
|---|---|---|
| Color | yellowish gray | yellowish gray |
| Residue + 63µm % | 10 - 15 | 10 - 15 |
| Density g/l | 1605 | 1602 |
| Viscosity | 357 | 353 |
| thixotropic 1(6) | 4(19) | 3(17) |
| Sodium silicate | 0.38 | 0.79 |
| Sodium hexa-meta phosphate | 0.18 | 0.28 |
| Dry shrinkage | 4.5 | 10 |
| Thickness 1/1.5 h | 7.1/9.2 | 8.3/9.9 |
| firing shrinkage | 10.9 | 12.4 |
| Water abosrpation % | 11.6 | 10.7 |
| L.O.I | 11.1 | 12.9 |
| Deformation mm | 4.9 | 4.5 |
Description & Applications
Kaolin of the required metals in industrial applications due to its high ability to absorb water and its ability to transfer heat and electricity is weak, Kaolin is an inert metal that is not chemically effective. In addition, it has a strength in covering and concealment when used as a colored material in dyeing and coating works or as a filler. Kaolin used in several plastic applications such as Refractories industry , Chinese and porcelain industry, Rubber industries, Battery industry, ceramics, porcelain, sanitary ware ,Paper industry, Cosmetic , Medications , Agriculture and Manufacture of pesticides .
| SiO2 | 57.35 |
|---|---|
| TiO2 | 2.14 |
| Al2O3 | 36.46 |
| Fe2O3 | 1.02 |
| MnO | < 0.01 |
| MgO | 0.08 |
| CaO | 0.09 |
| Na2O | 0.05 |
| K2O | 0.05 |
| P2O5 | < 0.01 |
| CI | < 0.01 |
| SO3 | < 0.01 |
| L O I | 5.38 |
Description & Applications
Kaolin Surround W. P. is made from 98% kaolin clay, a naturally occuring mineral. When applied to fruit trees, crops, and other plants, it forms a white film. Surround suppresses a wide range of pests, especially those which damage fruit crops including pears, apples, grapes, berries, and some vegetables. It can be applied up to day of harvest and is easily rubbed off when the fruit or produce is ready to eat. Surround can help control pests such as: pear psylla, cutworms, pear midge, pear slug, apple sucker, climbing cutworm, eastern tent caterpillar, gypsy moth, japanese beetle, june beetle, grasshoppers, green fruit worm, leafrollers, lygus bug, mormon cricket, cicada, stink bug, tarnished plant bug, thrips, fabria leafspot, apple maggot, codling moth, plum curculio, rose chafer, aphids, naval orangeworm, husk fly, blueberry maggot, blackberry psyllid, flea beetles, orchards, grape leaf skeletonizer, bean leaf beetle, mexican bean beetle, powdery mildew, cucumber beetle, boll weevil, armyworm, black vine weevil, and fruit flies Kaolin used in several plastic applications such as Refractories industry , Chinese and porcelain industry , Rubber industries, Battery industry, Paper industry, Cosmetic , Medications , paints, Agriculture and Manufacture of pesticides. How it works Insects are repelled by Surround. It sticks to their body parts and encourages them to move on elsewhere. At harvest time, the white film can be removed simply by rubbing off. General usage Use in orchards, fields, vegetable gardens. Advisories Do not apply directly to water, or to areas where surface water is present or to intertidal areas below mean high water mark. Application rates General rate varies between 25 – 12.5 kg per 100 Liter of water. Amount of water used will depend on amount of foliage to be treated.
CHEMICAL COMPOSITION:
| Si02 | 55% |
|---|---|
| AL203 | 45% |
| Fe2O3 | 0.4 % |
| Tio2 | 0.8 % |
| Cao | 0.5 % |
| MgO | 0.3 % |
| K2o | 0.1 % |
| Na2o | 0.2 % |
| MnO | 0.2 % |
| L.O.I | 0.5 % |
Physical Properties:
| Brightness (RY) (DIN 6174) | 95 % Min. |
|---|---|
| Whiteness (DIN 6174) | 96.5 % Min. |
| +325 mesh | 0.005 %Max |
| -2 Micron | 85 % Min |
| Color | white |
| Moisture content | 0.5 % Max |
| Bulk Density ( kg/ litre ) | 0.3- 0.5 |
| Specific Gravity | 2.7 g/ccm |
| Surface Area ( BET ;m²/g) | 9~14 |
| Oil Absorption (g/100g) | 55-65 |
| PH Value | 6-8 |
Description & Applications
Kaolin of the required metals in industrial applications due to its high ability to absorb water and its ability to transfer heat and electricity is weak , Kaolin is an inert metal that is not chemically effective. In addition, it has a strength in covering and concealment when used as a colored material in dyeing and coating works or as a filler. Kaolin used in several plastic applications such as Refractories industry , Chinese and porcelain industry , Rubber industries, Battery industry, Paper industry, Cosmetic , Medications , Agriculture and Manufacture of pesticides .
CHEMICAL COMPOSITION:
| Si02 | 40% |
|---|---|
| AL203 | 35.2% |
| Fe2O3 | 2.60 % |
| Tio2 | 0.09 % |
| Cao | 0.87 % |
| MgO | 0.60 % |
| K2o | 0.5 % |
| Na2o | 0.9 % |
| L.O.I | 20.26 % |
Physical Properties:
| Brightness (RY) (DIN 6174) | 82 % Min. |
|---|---|
| Whiteness (DIN 6174) | 83.5 % Min. |
| Color | Gray |
| Yellowness index | 4.4 Max. |
| Hardness (Mohs) | 3 – 2 Moh´s |
| Density | 2.80 g/cm3 |
| pH (ISO 787/9) | 8.2 Max. |
| Oil absorption (ISO 787/5) | 35 ±1 g/100g |
| Specific grafity g/cm | 2.23 |
| Surface area m2/g | 8 |
| Viscosity concentration % | 60 |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | Hk1 |
|---|---|
| Particles < 2 μm | 26 ± 2 % |
| Main Particle Size (D50) | 5.5 ±0.2 μm |
| Top Cut (D98) | 25± 1.0 μm |
المذيد من التفاصيل ؟
Description & Applications
Treated Silica sand (silica flour) its main mineral composition is SiO2, silica sand color is milky white or colorless translucent. Silicon sand is an important industrial mineral raw material, widely used in glass, casting, ceramics and refractories, metallurgy, construction, chemicals, plastics, rubber, foods, Cosmetic, Medications, Agricultureو abrasive and other industries
Chemical Composition and Physical Properties
| Sio2 | 99.4-99.5% |
|---|---|
| Mgo | 0.04% |
| Al2o3 | 0.06 % |
| Fe2o3 | 0.011 % |
| Cao | 0.03 % |
| Na2o | 0.05 % |
| K2O | 0.01 % |
| Tio2 | 0.025 % |
| ZrO2 | 0.06 % |
| L.O.I. | 0.22 % |
Physical Properties
| Brightness (RY) (DIN 6174) | 87 % Min. |
|---|---|
| Whiteness (DIN 6174) | 88.5 % Min. |
| Color | White |
| Yellowness index | 3.6 Max. |
| Hardness (Mohs) | 7 Moh´s |
| Bulk Density (gm/cm3 | Lose 0.62 |
| pH (ISO 787/9) | 7 Max. |
| Oil absorption (ISO 787/5) | 25 ±1 g/100g |
| Specific surface (m2/g) | 2.1 |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HS SF |
|---|---|
| Particles <2 μm | 60 ± 2 % |
| Main Particle Size (D50) | 2.0 ±0.2 μm |
| Top Cut (D98) | 5 ± 1.0 μm |
Description & Applications
Silica sand (silica flour) its main mineral composition is SiO2, silica sand color is milky white or colorless translucent. Silicon sand is an important industrial mineral raw material, widely used in glass, casting, ceramics and refractories, metallurgy, construction, chemicals, plastics, rubber, abrasive and other industries
Chemical Composition and Physical Properties
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
Chemical Composition
| Sio2 | 99.4-99.5% |
|---|---|
| Mgo | 0.04% |
| Al2o3 | 0.06 % |
| Fe2o3 | 0.011 % |
| Cao | 0.03 % |
| Na2o | 0.05 % |
| K2O | 0.01 % |
| Tio2 | 0.025 % |
| ZrO2 | 0.06 % |
| L.O.I. | 0.22 % |
Physical Properties
| Brightness (RY) (DIN 6174) | 87 % Min. |
|---|---|
| Whiteness (DIN 6174) | 88.5 % Min. |
| Color | White |
| Yellowness index | 3.6 Max. |
| Hardness (Mohs) | 7 Moh´s |
| Bulk Density (gm/cm3 | Lose 0.62 |
| pH (ISO 787/9) | 7 Max. |
| Oil absorption (ISO 787/5) | 25 ±1 g/100g |
| Specific surface (m2/g) | 2.1 |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HS 45 |
|---|---|
| Particles <2 μm | 60 ± 2 % |
| Main Particle Size (D50) | 2.0 ±0.2 μm |
| Top Cut (D98) | 45 ± 1.0 μm |
Description & Applications
Silica sand (silica flour) its main mineral composition is SiO2, silica sand color is milky white or colorless translucent. Silicon sand is an important industrial mineral raw material, widely used in glass, casting, ceramics and refractories, metallurgy, construction, chemicals, plastics, rubber, abrasive and other industries
Chemical Composition and Physical Properties
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
Chemical Composition
| Sio2 | 99.4-99.5% |
|---|---|
| Mgo | 0.04% |
| Al2o3 | 0.06 % |
| Fe2o3 | 0.011 % |
| Cao | 0.03 % |
| Na2o | 0.05 % |
| K2O | 0.01 % |
| Tio2 | 0.025 % |
| ZrO2 | 0.06 % |
| L.O.I. | 0.22 % |
Physical Properties
| Brightness (RY) (DIN 6174) | 84 % Min. |
|---|---|
| Whiteness (DIN 6174) | 88.5 % Min. |
| Color | White |
| Yellowness index | 3.6 Max. |
| Hardness (Mohs) | 7 Moh´s |
| Bulk Density (gm/cm3 | Lose 0.62 |
| pH (ISO 787/9) | 7 Max. |
| Oil absorption (ISO 787/5) | 25 ±1 g/100g |
| Specific surface (m2/g) | 2.1 |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HS 75 |
|---|---|
| Particles <2 μm | 7 ± 2 % |
| Main Particle Size (D50) | 8 ± 0.1 μm |
| Top Cut (D98) | 75 ± 1.0 μm |
Description & Applications
Silica sand (silica flour) its main mineral composition is SiO2, silica sand color is milky white or colorless translucent. Silicon sand is an important industrial mineral raw material, widely used in glass, casting, ceramics and refractories, metallurgy, construction, chemicals, plastics, rubber, abrasive and other industries
Chemical Composition and Physical Properties
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
Chemical Composition
| Sio2 | 99.4-99.5% |
|---|---|
| Mgo | 0.04% |
| Al2o3 | 0.06 % |
| Fe2o3 | 0.011 % |
| Cao | 0.03 % |
| Na2o | 0.05 % |
| K2O | 0.01 % |
| Tio2 | 0.025 % |
| ZrO2 | 0.06 % |
| L.O.I. | 0.22 % |
Physical Properties
| Brightness (RY) (DIN 6174) | 84 % Min. |
|---|---|
| Whiteness (DIN 6174) | 85.5 % Min. |
| Color | White |
| Yellowness index | 3.6 Max. |
| Hardness (Mohs) | 7 Moh´s |
| Bulk Density (gm/cm3 | Lose 0.62 |
| pH (ISO 787/9) | 7 Max. |
| Oil absorption (ISO 787/5) | 17 ±1 g/100g |
| Specific surface (m2/g) | 2.1 |
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
| Item codes | HS 100 |
|---|---|
| Residue on a 40 micron sieve | 10 ± 2 % |
| Median particle size d 50 micron | 9 ± 0.2 μm |
| Top Cut (D98) | 100 ± 1.0 μm |
Chemical analysis
| Sio2 | 99.5 - 99.6 |
|---|---|
| FE2O3 | 0.0140 |
| AL2O3 | 00.20-0.30 |
| TIO2 | 0.02500 |
| CR2O3 | 0.0020 |
| Moisture | 0.40 |
Characteristics
| Color | White |
|---|---|
| Grain Shape | Semi round- Angular |
| Bulk Density | (1400 – 1570 kg/m3) |
| Specific Gravity | 2.2 – 2.5 |
| Turbidity | <100 |
| Hardness | 7 Moh |
| Attrition Loss | below 1% in 100 hours backwashing |
| Acid Solubility | below 2% [24hours in 20% Hal] |
| Size | 0.200 mm : 0.800 mm |
المذيد من التفاصيل ؟
Description & Applications
calcium magnesium carbonate: - Not for medicinal use.
HD1 is a fine particle size, high brightness calcium magnesium carbonate derived from pure dolomite. It is characterized by its high whiteness and high purity.
Chemical Composition and Physical Properties
Particle Size Distribution by MALVERN (MASTERSIZER 3000) on normal product:
CHEMICAL COMPOSITION
| Si02 | 2.65% |
|---|---|
| AL203 | 0.07% |
| Fe2O3 | 0.05 % |
| Tio2 | 0.04 % |
| Cao | 29.75 % |
| MgO | 20.66 % |
| K2o | 0.08 % |
| Si02 | 2.65% |
| Na2o | 0.01 % |
| SO3 | 0.54 % |
| L.O.I | 45.75% |
Physical Properties
| Brightness (RY) (DIN 6174) | 88 % Min. |
|---|---|
| Whiteness (DIN 6174) | 89.5 % Min. |
| Color | White yellowish |
| Yellowness index | 5.6 Max. |
| Hardness (Mohs) | 4 – 3.5 Moh´s |
| Item codes | HD1 | Particles < 2 μm | 19 ± 2 % | Main Particle Size (D50) | 8.9 ±0.2 μm | Top Cut (D98) | 40 ± 1.0 μm |
|---|
المذيد من التفاصيل ؟
| Na 2 O | 1.89 | |
|---|---|---|
| MgO | 0.28 | |
| Al 2 O3 | 17.2 | |
| SiO2 | 56.2 | |
| P 2 O 5 | 0.038 | |
| SO 3 | 0.215 | |
| K 2 O | 11.8 | |
| CaO | 1.48 | |
| Fe2 O 3 | 0. 12 | |
| ZnO | 0.005 | |
| Cl | 0.026 | |
| Grain Size | Crushed from 0 mm to 30 mm (as customer need) | Powder as customer need (can provide below 45 micron) |
| Packaging | J. B. 1 Ton |
المذيد من التفاصيل ؟
PureChem 99MO Technical Data Sheet Magnesium Oxide MgO 92%
GUARANTEED ANALYSIS:
Description & Applications
Description is a caustic calcinated natural magnesite with a moderate activity. The low level of impurities make this product suitable for different applications such as; paints ,plasticts ,cellulose, fertilizer, Ceramics , Pharmaceutical , food industries , Fertilizers , Pharmaceuticals animal feed, and water treatment.
| Chemical compound | Percentage% |
|---|---|
| Magnesium Oxide (MgO)% (ON IGNITED BASIS) | 90.0 min |
| Magnesium Oxide (MgO)% | 90.0 min. |
| Calcium Oxide (CaO)% | 3.00 max. |
| Silica (SiO2)% | 2.00 max. |
| Aluminum Oxide (Al2O3)% | 0.20 max. |
| Iron Oxide (Fe2O3)% | 0.60 max. |
| Sulphate (SO3)% | 0.40 max. |
| Loss on Ignition% | 6.00 max. |
Physical Properties of the product
| Bulk density, g/l | 800.0 |
|---|---|
| Top cut | 20 micron |
| Median particle size D50 | 8 micron |
| Color | light brown to white |
| Surface area, m2/g | 12-30 |
| Water-soluble matter | Max. 2,0 % |
| Mol weight | 40,30 g/mol |
Packaging:
Available in 25 kg, polypropylene bags and jumbo big bags 1.25 ton
المذيد من التفاصيل ؟
| Quality | High |
|---|
المذيد من التفاصيل ؟
| Quality | High |
|---|
المذيد من التفاصيل ؟